Safety valve RV30 (3")
€101.97
Available, delivery time: heavily dependent on the destination
Product information "Safety valve RV30 (3")"
Safety relief valve RV30 for side channel blowers with G 2½" and 4" connection thread
suitable for: Side channel blowers in pressure resp. vacuum operation
Function: The side channel blowers are cooled by the external motor fan as well as by the air to be delivered in the side channel.
Therefore a safe and proper operation is only possible if the side channel blower is operated below the maximum permissible pressure difference. The use of a safety valve ensures that an adequate amount of air is always available for the cooling of the unit. The safety valves are adjustable and should be set to 90% of the maximum differential pressure of the corresponding side channel blower model.
| Description: | Safety relief valve manually adjustable (not pre-adjusted!) |
| Application: | for limiting a maximum pressure resp. vacuum |
| Spring: | V2 |
| Material: | aluminium |
| Options: | - without filter: pressure operation (limited also in vacuum operation) - with filter: vacuum operation |
| fits for: | SKV-NS-530 up to SKV-NS-1370 SKV-ND-520 and SKV-ND-1110 SKV-NDF-900 up to SKV-NDF-2050 |
- Don't forget to order the T-neck!
- The adjustable range depends on the used blower model and the operation mode!
Accesories
suitable for: Side channel blowers with G 4" connection thread function: For the assembly of a safety valve a connecting T-neck is required. For direct mounting on the side channel blower a pipe nipple is provided. technical data: Connections: 1x OT 4" connection of the side channel blower (by means of a double nipple)1x IT 3" connection of the safety valve (by means of a reduction) 1x IT 4" connection of the pressure resp. vacuum application Material: Malleable cast iron (T-neck) / PVC-U (double nipple and reduction) fits for: SKV-NS-1050 / SKV-NS-1370
suitable for: Side channel blowers with G 2½" connection thread function: For the assembly of a safety valve a connecting T-neck is required. For direct mounting on the side channel blower a double nipple is provided. technical data: Connections: 1x OT 2½" connection of the side channel blower (by means of a double nipple)1x IT 3" connection of the safety valve (by means of a double nipple)1x IT 2½" connection of the pressure resp. vacuum application Material: Malleable cast iron (T-neck) / PVC-U (double nipple) fits for: SKV-NS-530 / SKV-NS-700SKV-ND-520SKV-NDF-900
Safety relief valve set for a bought side channel blower The safety relief valve is set at a desired value (but at most 90% of the highest permissible value)