T-neck G4" for RV30 (3")
€142.14*
Available, delivery time: heavily dependent on the destination
Product number:
150109
Product information "T-neck G4" for RV30 (3")"
suitable for: Side channel blowers with G 4" connection thread
function: For the assembly of a safety valve a connecting T-neck is required. For direct mounting on the side channel blower a pipe nipple is provided.
technical data:
| Connections: | 1x OT 4" connection of the side channel blower (by means of a double nipple) 1x IT 3" connection of the safety valve (by means of a reduction) 1x IT 4" connection of the pressure resp. vacuum application |
| Material: | Malleable cast iron (T-neck) / PVC-U (double nipple and reduction) |
| fits for: | SKV-NS-1050 / SKV-NS-1370 |
Accesories
Safety valve RV30 (3")
From
€101.97*
Safety relief valve RV30 for side channel blowers with G 2½" and 4" connection thread
suitable for: Side channel blowers in pressure resp. vacuum operation
Function: The side channel blowers are cooled by the external motor fan as well as by the air to be delivered in the side channel. Therefore a safe and proper operation is only possible if the side channel blower is operated below the maximum permissible pressure difference. The use of a safety valve ensures that an adequate amount of air is always available for the cooling of the unit. The safety valves are adjustable and should be set to 90% of the maximum differential pressure of the corresponding side channel blower model.
technical data:
Description:
Safety relief valve manually adjustable(not pre-adjusted!)
Application:
for limiting a maximum pressure resp. vacuum
Spring:
V2
Material:
aluminium
Options:
- without filter: pressure operation (limited also in vacuum operation)- with filter: vacuum operation
fits for:
SKV-NS-530 up to SKV-NS-1370SKV-ND-520 and SKV-ND-1110SKV-NDF-900 up to SKV-NDF-2050
Attention:
Don't forget to order the T-neck!
The adjustable range depends on the used blower model and the operation mode!