PSW-A6
| Quantity | Unit price |
|---|---|
| To 9 |
€10.29
|
| To 19 |
€8.23
|
| To 34 |
€7.20
|
| To 49 |
€6.17
|
| From 50 |
€5.14
|
Available, delivery time: heavily dependent on the destination
Product information "PSW-A6"
Can sense the difference between two pressure levels as well as positive and negative pressure.
Switching point: Pressure: 5 - 800 mbar Vacuum: 10 - 800 mbar
Contact arrangement: Single pole, single throw, normally open or normally closed (SPST N.O. or N.C.)
Upper port can be delivered with a different orientation than the lower port
This pressure switch is usually used to sense differences between two pressure levels, but can also be used to sense pressure or vacuum. The switch is optimised for use on circuitboards, therefore the electrical contacts are two 1.0 mm pins. Furthermore the upper part of the pressure switch can be delivered with a different orientation of the upper pressure port compared to the lower port. The low tolerance of ±5% in a wide range and low hysteresis are also features of this switch. The switching point can be changed by the user with a adjusting screw. The switch can be delivered as single pole single throw normally open or normally closed (SPST N.O. or N.C.) and with silver-alloy or gold-alloy contacts.
| einstellbar: | ja |
|---|
Accessory Items
Can be used as a vacuum pressure switchSwitching point: Vacuum: 10 - 800 mbarElectrical design: Normally closed contact This variant of the well-known PSW-A6 is designed purely as a vacuum switch. Only one air connection is available for the vacuum side. Electrically, this pressure switch is the reverse version of the PSW-A6. As the contacts are on the other side, this switch is only available as an NC contact. The switch is optimised for use on printed circuit boards. Therefore, two 1.0 mm pins are available as electrical connections. The low tolerance of ±5% over a wide range and low hysteresis also characterise this model. The pressure switching point can be changed by the user via the adjusting screw. The mutual position of the screw in relation to the pins facilitates mounting on the PCB. The switch is available as a normally closed contact with gold or silver plated contacts. The complete pressure range cannot be covered by a single model; different springs are used for different ranges. Attention: Due to its small size, the model has only short spring travel. If in doubt, please enquire whether a specific pressure can be set with a specific model.A desired switching point is only possible from an order quantity of 50 pieces.